Direct Manufacture Z80 Intelligent Power Supply with Screen for 90w Laser Tube

Description

Z80 Laser Power Supply for RECI/EFR/YONGLI 80w/90w Laser Tubes
Model: Z80
​
【
Packing List
】
(1)
Z80 power supply*1pc;
(2)
Z screen*1pc,
(3)
1.5m cable with connector*1pc
1. Main Features
Ø
Good compatibility: Z80 laser power supply can work RECI/EFR/YONGLI/WEEGAINT 80w/90w co2 laser tubes
Ø
High intelligence: built-in control, can communicate with motion controller, and it can communicate with max 32pcs power supplies by cascade connecting, then the controller panel can display working condition of power supply, very easy for user to monitor and judge the fault.
Ø
Make the maintenance much easier: User can judge the problem by himself.
Ø
Multi-function LCD screen: One LCD screen can show the information of two power supplies, easy use for multi-head machine.
Ø
Universal: with PFC function, AC90-250V input voltage range, globally universal.
Ø
Open circuit protection: When the high voltage end is in open circuit or not connected well, the power supply will start automatic protection, to prevent high voltage arc effectively.
Ø
More safety: with high voltage discharge function, no residual voltage when turning off, safer for user.
Ø
Excellent cover with patent design: Good appearance, better heat dissipation.
Ø
Improved current control mode, more stable laser, better compatibility.
2. Specification
Item
Z80
Z100
Z150
Input
Input voltage
AC90-250V
AC frequency
47---440Hz
Max input power
500W
700W
900W
Max input current
(when 90V input)
6A
8A
10A
Output
Max output voltage
40KV
45KV
55KV
Max output current
28mA
32mA
38mA
Efficiency
≥90%(when full load)
MTBF
≥10000 hours
Response speed
≤1mS
(the time from the signal is given to output current
reaches 90% of set current)
Switch control mode
TTL
Power control mode
PWM(>20KHz
）
or 0-5V or 0-3.3V analogue
Communication mode
Special serial port
Withstand voltage
Input-output, input-shell:AC1500V 10mA 60s
；
Working environment
Temperature
（
-10~40
）
℃
, relative humidity:≤90%
Cooling
Force air cooling
Dimension
L*W*H(mm)
235*144*104
278*144*104
330*144*104
Weight
(KG)
2.15kg
2.45kg
3.2kg
Color
Silver
Laser power supply parameter-co2 laser tube
Z80 working RECI W2 co2 laser tube
Power Supply
Warranty(month)
Matching RECI laser tube
Z80
12
90W     W2/Z2/S2
Z100
12
100W    W4/Z4/S4
Z150
12
130W    W6/Z6/S6
150W    W8/Z8/S8
Z80 working EFR F2 co2 laser tube
Model
Length (mm)
Diameter (mm)
Rated Power (W)
Max Power (W)
Current (mA)
Catalyst
F2
1250±20
Ø80±2
80
95
28
YES
F4
1450±20
Ø80±2
100
120
30
F6
1650±20
Ø80±2
130
150
30
F8
1850±20
Ø80±2
150
165
30
Z80 working EFR ZS-1250 co2 laser tube
Model
Length(mm)
Diameter (mm)
Rated Power (W)
Max Power (W)
Current (mA)
Catalyst
ZS-1250
1250±20
80±2
80
95
28
YES
ZS-1450
1450±20
80±2
100
120
30
ZS-1650
1650±20
80±2
130
150
30
ZS-1850
1850±20
80±2
150
165
30
4. Operation Instruction
1)
Laser Tube connection:
The power supply high voltage terminal (HV+) should be connected to the positive pole of CO2 laser device. Current circuit of the power supply shall be connected to negative pole (laser output terminal) of laser device, through an ampere meter or directly.
2)Connection of control signal
The control signal shall be reliably connected to control terminal of the power supply ,after connecting the DAC output signal and TTL signal of external computer with the power supply, the laser device shall work as expected. If the laser lamp can not work properly, should check the control signal is correct or not(include check the voltage specification and logic),if use PWM control as power control,make sure f≥20KHz,
Amplitude (peak value)
≤5V,
Check
and make sure
protection switch WP connection is correct
at same time.
Caution:
1.Water cooling system should be working properly when switching on laser device.
2.Circuit of high voltage output should not be open! (High voltage output terminals (positive and negative poles) shall be properly connected to positive and negative poles of laser device, respectively.)
3.Attentions should be given to avoid any electric shock after the power supply being switched off.(The
Insulation s
afety requirements
should be 40KV between the terminal of output and  "G")
4. Well-grounded three-pole receptacle should be used to supply power to power supply. The enclosure should be well grounded to avoid electric shock.
5.
Attention;
Customs Duties:
All the products shipping from China might cause tariffs. Please know well about your country's import laws.
All the products we selling default FOB trading terms, the buyers will take his responsibility on all kinds
of tax in their country. If you have special requests about declaration, please leave messages to us when you make an order.
Shipping from local country (Germany/USA/Russia) has no import tariffs required.
All packages to
Brazil
need
CPF/CNPJ
number by DHL/UPS/Fedex/EMS.
All packages to
Argentina
need
CUIT
number by DHL/UPS/Fedex/EMS.
All packages by
Chile
need
RUT
number by DHL/UPS/Fedex/EMS.
All packages to
Russia
need the
Full Name
(
First name + Mid name + Last name
).
6.FAQ
Here is a list of the buyers in the shopping or after-sales service problems
Maybe some of your doubts will find the answer here
Q: Are you the mabufacturer of the co2 laser power supply?
A: Yes,we started to produce co2 laser power supply from 2001year,our brand HONGYUAN is famous in overseas market.
Q: Which Chinese company you cooperated with?
A: My factory has long cooperated with Senfeng,Bodor,Ruijie,AOL,Redsail,King Rabit,Han's Yueming,EFR,RECI,
Sun-up,GoldenSign,ect.
Q: Besides co2 laser power supply do you provide other laser parts?
A: Yes,I can provide co2 lasre tube,focus lens,mirror,laser head,controller,worktable ect.If you need any of them please
leave me message.
Q: Which city is your factory in?
A: My factory located in China,Shandong province,Jinan city.Welcome visting my factory.
Q: How can track my parcel?
A: You can track your parcel on the relevant express website.
Q: Can you Accept drop shipping?
A: We could send the goods to your customers directly and won’t leave infroamtion about us if you’d like to.
Q: Is there any discount for bulky order?
A: Yes,we can provide wholesales price if you need more. Please leave me message.
Q: Do your company accept Customize order?
A
：
Yes,of cource! If you have special requirements on the power supply,you can contact me to tell me the details.
Q: Is there any customs Tax?
1. usually we will declare low value to avoide customs Tax.
2. we will
declare - for Expedited Shipping
(Aramex,DHL,EMS,FEDEX,TNT,UPS).If you have any special
requirements on the Shipping Value, please leave me message when placing order.
3. But due to different policies in different countries,there might be Customs tax that should be paid by the buyer.